Esskay Drilling Machines

The Drilling Machine is an electronic machine which is used for making holes in the hard surface. Also it has cut edges at its points. Drilling machine is a handheld device. It is like a gun. The drilling machine is also called drill press. Drill is a fixed style that may be mounted on a stand or bolted to the floor or workbench. Drilling machine has a base, column, table and head that are all dependent on motor. Drilling machine has mainly three parts 1) Point 2) Body 3) shank. This is normally made of a tapered shank rotated by a motor. There are two types of shank, straight and Tapered. The tapered shank is usually used on drills. Drilling Machine’s head part, that is located at the top end, which penetrates through the material.

Pillar Drill Machine EPD- 12
Pillar Drill Machine EPD- 12
Pillar Drill Machine EPD- 15
Pillar Drill Machine EPD- 15

Various types of machines are available in the market. Mostly drilling machines are made of steel and diamond. Drilling machine perform many functions like drilling, woodworking, grinding and construction etc. The drilling machines can be light weighted and heavier ones too. Its speed limits up to 1000 RPM. In the drilling machine the feed rate is higher and the spindle speed is lower. Drilling machine comes in small size and large size. Drilling machine has own advantages like- fast speed, accurate, consistent and the operation must be secure. Accessories used in drilling machine like-Screw, water pumps and nibblers for cutting metal sheet. It has general purpose which included angles. In this soft and hard material can be used, but drill for hard material between 135 and 150 degrees also soft material 60 and 90 degrees. The purpose of drilling machine, it is used to bolt odd shaped work to it for drilling. It is also useful for drilling at right angles to a surface. Sensitive drill presses are typically for small holes.

Pillar Drill Machine EPD- 19
Pillar Drill Machine EPD- 19
Pillar Drill Machine EPD- 25
Pillar Drill Machine EPD- 25

The cutting action is the part that takes place on the point of the drill. It is the main purpose of the margin of a drill it the outside diameter, it is larger than the body. The base of an upright drilling machine will have coolant stored in the base with a pump to apply it. These are the seven steps about how to use drilling machines:
1) Mark the hole with a centre mark at least as large of the drill.
2) Clean the vice and table and ensure clearance between the work-piece and under the hole.
3) Use a soft faced hammer to drive the work-piece flat.
4) Position the work-piece under the centre of the spindle. Turn it in reverse and carefully lower the drill into the punch mark.
Also make it clear where you need to push the work to align it yourself.
5) Raise the drill carefully not to move it.
6) Set the spindle speed and feed rate and apply coolant where the drill enters the work.
7) Drill the hole.
Features of drilling machine-
1) The hole is permanent to a long time.
2) The drill is completed at 190 degree angle.

Pillar Drill Machine EPD- 32
Pillar Drill Machine EPD- 3

Lathe Machine | Drilling Machine | Radial Drilling Machine | Shaper Machines | Milling Machine | Power Press Machine | Horizontal Boring Machine | CNC Lathe Machine | Planner Machine | Lathe Machine Manufacturer | Hose Clamps | Stainless Steel Fasteners | Thrust Bearing | oil expeller manufacturer | milling machine | shaper machines | Power press machine | horizontal boring | cnc lathe machine | shearing machine | hydraulic press brake | Lathe Machine manufacturer | drilling machine manufacturer | planner machine manufacturer | milling machine manufacturer | Power press machine manufacturer | horizontal boring manufacturer | cnc lathe machine manufacturer | shearing machine manufacturer | hydraulic press brake manufacturer | Lathe Machine india | drilling machine indiamilling machine india | shaper machines india | Power press machine india | cnc lathe machine india | shearing machine india | hydraulic press brake india

Other Useful Links:-

Bicycle Air Pump manufacturer in Ludhiana India
Bicycle B.B. Set manufacturer in Ludhiana India
Bicycle Hub manufacturer in Ludhiana India
Bicycle v-brake manufacturer in Ludhiana India
Bicycle fasteners manufacturer in Ludhiana India
Bicycle lever manufacturer in Ludhiana India
Lever manufacturer in Ludhiana India
Brake manufacturer in India
Bicycle brakes manufacturer Ludhiana
Bicycle disc brake manufacturer in Ludhiana
Caliper brake manufacturer